Power

5V G3MB-202P module with screw terminals

Mode: Omron G3MB-202P
Control Input: 5V ( 3.3V-6V ) DC
Load : 75V ~ 264V AC 2A

5V to 3.3V AMS1117 Regulator Module

• Input voltage: For DC 4.2 V-10 V

• Output: 3.3 V, 800 mA

• Size:8.6mm x 12.33mm

9V Battery Power Cable
with Bare Leads

9V Battery Power Cable
with Barrel Jack for Arduino Uno

various cables...

"micro" is typically used for the Nano32 - 1m long

"mini" is typical for the "normal" Nano - 1m long

the "A" extension is good for the USBasp - 1m long

NOTE - the micro with switch is POWER-ONLY - no data - NOT for Uploading..  2m long
           - Colours may vary from photo.

5V G3MB-202P

Mode: Omron G3MB-202P
Control Input: 5V ( 3.3V-6V ) DC
Load : 75V ~ 264V AC 2A

Input: 4.75 - 23 VDC
Output: 1 - 17 VDC - continuously variable
Current Output: max. 3A - steady 1.8A

Battery Holders - AAA to 18650

Input: 2 - 24 VDC
Output: 3 - 28 VDC - continuously variable
Current Output: max. 2A

Input: 4.5 - 28 VDC
Output: 0.8 - 20 VDC - continuously variable
Current Output: max. 3A - steady 1.8A
1.5 MHz switching frequency
Dimensions:  22mm x 17mm

Coin Cell Battery Holders - CR2032/CR2025

2 pc Heat Sink Kit for RaspBerry Pi or Orange Pi or ESP8266/ ESP32 / Motor Controller Aluminium with peel off mounting tape.

USB in-line Voltmeter, Ammeter, Power Meter