Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Original ESP32-S3 Dev Kit - 32M Octal
CAD$39.99
UART module for ESP-01
CP2102 USB to UART for ESP MCUs
CAD$9.49
ESP32 20pin IOT
CAD$7.99
ESP32 19pin
CAD$9.99
ESP32 19pin ext. Antenna
CAD$12.99
Original ESP32-S3 Dev Kit - 8M Quad
CAD$34.99
Original ESP32-S2 12K
Out of Stock
CAD$14.99
ESP32-S2 proMINI
ESP32-S2 Break Out Board
Out of Stock
CAD$9.99
ESP32-S2 proMINI
ESP32-S2 Break Out Board
CAD$6.99
ESP32S Chip
CAD$6.99
ESP32 Breakout for ESP32S or ESP32D
CAD$1.99
Arduino UNO ESP32 Development Board
CAD$15.99
ESP32L-13pin devKit - Lithium
Out of Stock
CAD$8.49
ESP32 15pin - 3D Antenna
Out of Stock
CAD$8.99
ESP32-S3-32M (ESP32-S3-32M)
Original Espresif factory ESP32-S3 DevKit:

ESP32-S3-WROOM-1N32R8V Development Kit

  • Two 240MHz Xtensa LX7 cores
  • 2 main cores - 2 low-power cores
  • WiFi, USB OTG Host
  • BlueTooth BLE
  • 32MBytes 8X Octal SPI Flash
  • 8MBytes 8X Octal SPI PSRAM
  • 512 kBytes SRAM
  • 36  available GPIOs
  • 1.0in spacing between 2 rows of 22 pins each


Note:  The Arduino board package does not have support built-in for the 32M Flash (only up to 16M) - I will try to fix this soon..

Reference

Original ESP32-S3 Dev Kit - 32M Octal
CAD$39.99
UART module for ESP-01
CP2102 ESP (CP2102U-ESP)
USB UART with both DTR and RTS for ESP MCUs.  The DTR and RTS pins have jumper seletable circuitry to make for smooth uploading to ESPs without having to jump up and down on the buttons or yank jumpers in and out.  DTR goes to Reset and RTS goes to GPIO 0.

Jumpers are provided to deselect ESP mode to allow use of the DTR as Reset for regular AVR MCUs.

The internal regulator of the CP2102 is not really robust enough for larger ESPs like the ESP32-S3...  so this board includes a separate 850mA  3V3 regulator.

Jumper selectable 3V3 or +5V Vcc

micro USB..
CP2102 USB to UART for ESP MCUs
CAD$9.49
ESP32-20 (ESP32-20)
Espresif ESP32-WROOM microcontroller

  • 240MHz CPU Clock
  • 2 main cores - 1 pico power core
  • WiFi, BlueTooth
  • 26 available GPIOs
  • - 0 thru 5 = 6 x I/O
  • - 12 thru 19 = 8 x I/O
  • - 21 thru 23 = 3 x I/O
  • - 25 thru 27 = 3 x I/O
  • - 32 thru 33 = 2 x I/O
  • - 34, 35, 36, 39 = 4 x Input
  • 0.8in spacing between rows
  • BreadBoard Friendly
  • IOT verison has no LEDs to save battery

Just add "https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json"
to the Arduino IDE File->Preference->Additional Board Manager URLs to add the official expressif Arduino support
Includes many example sketches. Uses freeRTOS..

ESP32 20pin IOT
CAD$7.99
ESP32-19 (ESP32-19)
Espresif ESP32-WROOM-32 microcontroller

  • 240MHz CPU Clock
  • 2 main cores - 1 pico power core
  • WiFi, BlueTooth
  • 26 available GPIOs
  • - 0 thru 5 = 6 x I/O
  • - 12 thru 19 = 8 x I/O
  • - 21 thru 23 = 3 x I/O
  • - 25 thru 27 = 3 x I/O
  • - 32 thru 33 = 2 x I/O
  • - 34, 35, 36, 39 = 4 x Input
  • 0.9in spacing between rows
  • BreadBoard Friendly 1 row each side

Just add "https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json"
to the Arduino IDE File->Preference->Additional Board Manager URLs to add the official expressif Arduino support
Includes many example sketches. Uses freeRTOS..

ESP32 19pin
CAD$9.99
ESP32-19U (ESP32-19u)
Espresif ESP32-WROOM-32 microcontroller

  • 240MHz CPU Clock
  • 2 main cores - 1 pico power core
  • WiFi, BlueTooth
  • 26 available GPIOs
  • IPX connector for external Antenna (included)
  • - 0 thru 5 = 6 x I/O
  • - 12 thru 19 = 8 x I/O
  • - 21 thru 23 = 3 x I/O
  • - 25 thru 27 = 3 x I/O
  • - 32 thru 33 = 2 x I/O
  • - 34, 35, 36, 39 = 4 x Input
  • 0.8in spacing between rows
  • BreadBoard Friendly
  • IOT verison has no LEDs to save battery

Just add "https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json"
to the Arduino IDE File->Preference->Additional Board Manager URLs to add the official expressif Arduino support
Includes many example sketches. Uses freeRTOS..

ESP32 19pin ext. Antenna
CAD$12.99
ESP32-S3-8M (ESP32-S3-8M)
Original Espresif factory ESP32-S3 DevKit:

ESP32-S3-WROOM-1N8 Development Kit

  • Two 240MHz Xtensa LX7 cores
  • 2 main cores - 2 low-power cores
  • WiFi, USB OTG Host
  • BlueTooth BLE
  • 8MBytes 4X Quad SPI Flash
  • 512 kBytes SRAM
  • 36  available GPIOs
  • 1.0in spacing between 2 rows of 22 pins each


Reference
Original ESP32-S3 Dev Kit - 8M Quad
CAD$34.99
ESP32-12K (ESP32-12K)
AI-Thinker ESP32-S2 DevKit
ESP32-S2-WROVER microcontroller

  • 240MHz Xtensa A7 core
  • 1 main core - 1 pico power core
  • WiFi, USB OTG Host
  • 320 kBytes SRAM
  • 4MBytes Flash
  • 128 kBytes PROM
  • 37 available GPIOs
  • - 0 thru 21 = 22 x I/O
  • - 26 = 1 x I/O
  • - 33 thru 46 = 14 x I/O ( TX0=43, RX0=44 )
  • 1.0in spacing between 2 rows of 21 pins


Manual PDF ( 532 pages )

Original ESP32-S2 12K
Out of Stock
CAD$14.99
ESP32-S2 proMINI
ESP32-S2 BreadkOut (ESP32-S2 proMini)
Our own design - we call it an ESP32-S2 proMINI
ESP32-S2-WROVER microcontroller

  • 240MHz Xtensa A7 core
  • 1 main core - 1 pico power core
  • WiFi, USB OTG Host
  • 320 kBytes SRAM
  • 4MBytes Flash
  • 128 kBytes PROM
  • 37 available GPIOs
  • - 0 thru 21 = 22 x I/O
  • - 26 = 1 x I/O
  • - 33 thru 46 = 14 x I/O ( TX0=43, RX0=44 )
  • 1.0in spacing between 2 rows of 21 pins


Manual PDF ( 532 pages )

ESP32-S2 Break Out Board
Out of Stock
CAD$9.99
ESP32-S2 proMINI
ESP32-S2 BreadkOut Junk (ESP32-S2 proMini junk)
Our own design - we call it an ESP32-S2 proMINI
some layout errors and 1 omission on this one...
need to use jumpers for serial upload.
see my github for more details..

ESP32-S2-WROVER microcontroller

  • 240MHz Xtensa A7 core
  • 1 main core - 1 pico power core
  • WiFi, USB OTG Host
  • 320 kBytes SRAM
  • 4MBytes Flash
  • 128 kBytes PROM
  • 37 available GPIOs
  • - 0 thru 21 = 22 x I/O
  • - 26 = 1 x I/O
  • - 33 thru 46 = 14 x I/O ( TX0=43, RX0=44 )
  • 1.0in spacing between 2 rows of 21 pins


Manual PDF ( 532 pages )
ESP32-S2 Break Out Board
CAD$6.99
ESP32-S (ESP-32S)
small ESP32 module with IPXAntenna connector
ESP32S Chip
CAD$6.99
ESP32 Breakout (ESP32bo)
Breakout for ESP32S or ESP32D

good for low power IOT projects - no regulator or LEDs

ESP32 not included.


ESP32 Breakout for ESP32S or ESP32D
CAD$1.99
Arduino UNO ESP32 (UNOESP32)
Arduino ESP32 UNO format Development board
with microUSB connector for uploading...


Arduino UNO ESP32 Development Board
CAD$15.99
ESP32L-13 (ESP32L13)
Impresif ESP32 microcontroller

  • 240MHz Arduino Nano
  • 2 main cores - 1 pico power core
  • WiFi, BlueTooth
  • 4 MByte Flash, 520 kByte sRAM
  • 21 available GPIOs
  • - 0, 2, 4, 5 = 4 x I/O
  • - 12 thru 19 = 8 x I/O
  • - 22 thru 23 = 2 x I/O
  • - 25 thru 27 = 3 x I/O
  • - 32 thru 33 = 2 x I/O
  • - 34 thru 35 = 2 x Input
  • .9in spacing between 2 rows of 13 pins
  • Connector and charging circuit for an external Lithium Battery

Just add "https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json"
to the Arduino IDE File->Preference->Additional Board Manager URLs to add the official expressif Arduino support
Includes many example sketches. Uses freeRTOS..

ESP32L-13pin devKit - Lithium
Out of Stock
CAD$8.49
ESP32-15 (ESP3215)
espresif ESP32 microcontroller

  • 240MHz Arduino Nano
  • 2 main cores - 1 pico power core
  • WiFi, BlueTooth
  • 4 Meg Flash
  • 24 available GPIOs
  • 1.0in spacing between 2 rows of 15 pins
  • 3D Antenna

Just add "https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json"
to the Arduino IDE File->Preference->Additional Board Manager URLs to add the official expressif Arduino support
Includes many example sketches. Uses freeRTOS..

ESP32 15pin - 3D Antenna
Out of Stock
CAD$8.99
Per Page      1 - 14 of 14
  • 1